Marine Dual Drive Motor

Marine Dual Drive Motor

2 Speed • 

Drives pantograph arms and blades to 39”/1000mm • 

Available in sweep angles from 40 degrees to 80 degrees • 304 Stainless steel pivot DIN pivots • 

Available in right or left hand park configurations

MOTOR TORQUE: 12v -55Nm, 24v - 50Nm SHAFT LENGTH: 1.”, 1.25”, 2”, 2.5” or 3” 

SHAFT CONSTRUCTION: Stainless steel with AI housing SHAFT TYPE: DIN (A12xM8) (per DIN 72783)

 LOW SPEED: 38 sweeps/minute HIGH SPEED: 60 sweeps/minute 

MOTOR VOLTAGE: Available in 12v or 24v 

GROUNDING: Isolated FUSING: 20 amps minimum 

WIRE INSULATION: Black=Park, Green=Low Speed, White=Ground, Red=High Speed, Brown =ground, Blue=switch WIRING: 16AWG, 7” leads 

PARK CIRCUITRY: Dynamic park 

PARK POSITIONS: Available in left or right park configurations 

CONNECTOR: 6 pin Deutsch WEIGHT: 4Kg / 8.8lb