Mud pump package with CAT engine

Series F mud pump has long stroke length so that stroke numbers are reduces and fluid end quick-wear parts last longer. Forced combined with splash lubrication ensure more efficient lubrication. Series F pump is proper-structured, compact, durable, running smoothly and accommodate special requirements during drilling wells ranging from intermediate to deep depth. Series F mud pump is compact and reliable. Suction valve and discharge valve are interchangeable. Triple cylinders and fluid end main components on each pump are interchangeable. Series F mud pump durable fluid end greatly improves performance of triplex pump and its unique design enables quick check and convenient repair.

Mud pump package with CAT engine

Specification

PAH 275 Mud Pump and Series PZ Mud Pump Features

• Nodular iron power frame, eccentric, connection rods, and crossheads.

• Double-row-spherical roller bearings carry eccentric.

• Double extended Jack shaft carried on heavy-duty straight roller bearings.

• Dual roller bearing connecting rod.

• Heat-treated alloy steel main gears are bolted to the eccentric.

• Replaceable bronze crosshead slides.

• Full splash lubrication, with oil pump to feed working parts.

• Heat-treated alloy steel, interchangeable fluid cylinders.

• Three-rib API-7 urethane insert valves and seats.

• Replaceable-type element oil filter and oil pressure gauge.

• Threaded valve covers.

• Plated piston rods.

• Complete piston washing and lubrication system.

Specification

W440/W446 Mud Pump Features

W440/446 Pump can be widely used in all kinds of works in oil field. When the cylinder liner specification is 6"-3 1/2", piston structure is recommended and it is suitable for Oil-Well Repair and shallow-well drilling, etc. When the cylinder liner specification is 3 1/4"-2", axial piston structure is recommended and it is suitable for high-pressure work.

Specification

W440 Mud Pump

• Rated input power: 324KW (440HP)

• Rated Stroke: 320 Stroke/Minute(320SPM)

• Stroke: 152.4mm （6"）

• Gear Ratio: 4.578 ：1

• Max. operation pressure: 35Mpa

• Valve chamber Valve-Over: API 4#

• Max. liner dia.: 4-1/2″

• Max. liner mud pressure: （220 stroke/minute）16.9Mpa

• Dia. of suction manifold: 6″ (150#) Flange

• Dia. of discharge manifold: 3″(900#) Flange

• Dia. pinion shaft: 95.25 mm(3.75″)

W446 Mud Pump

• Rated input power: 328KW (440HP)

• Rated Stroke: 320 Stroke/Minute(320SPM)

• Stroke: 152.4mm （6"）

• Gear Ratio: 4.578 ：1

• Max. operation pressure: 35Mpa

• Valve chamber Valve-Over: API 4#

• Max. liner dia: 6″

• Max. liner mud pressure:（160 stroke/minute）16.9Mpa

• Dia. of suction manifold: 6″ (150#) Flange

• Dia. of discharge manifold: 3″(900#) Flange

• Dia. pinion shaft: 95.25 mm(3.75″)

• Key: 22.174x15.9mm

Series 3NB mud pump features

Specification

• Power end: the frame is a welded structure with steel plate, subject to post welding internal stress relief. Gear is involute type, smooth running, high efficiency and long service life. Crankshaft is one-piece hollow cast. Power end is splash lubricated.

• Fluid end: suction and discharge flange conform to ASA and API specification.

• Piston rod and extension rod are connected with coupling for quick assembly and disassembly.

• Bench at the bottom of valve positioning hole prevents valve seat sinking. Piston and liner are cooled and lubricated by separate spraying pump device for longer service life.

• Quick-wear parts are interchangeable.

Specification